The primary audience for this course is as follows:
- Network Video Engineer
- Voice/UC/Collaboration/Communications Engineer
- Collaboration Tools Engineer
- Collaboration Sales/Systems Engineer
Prerequisites
- Understand network fundamentals
Installing and Configuring Cisco Cube/Gateways (ICCC)
This is a 3-day hands-on course, where students will learn how to deploy Voice Gateways/CUBE and setup Cisco Unified Communication Manager (CUCM) to deploy SIP Trunking. Students will learn how to configure Gateway Dial plans, CUCM to CUBE Configuration, Dial Plans, Normalize SIP, Configure High Availability, Configure Voice Security and Voice Policies, as well as monitoring and troubleshooting Voice Configurations. The course starts out with an overview of Cisco gateways and their uses. Next, students learn about MGCP and SIP and how to implement each protocol. Students will then learn how to use Cisco CUBE to connect CUCM, Gateways and Service Providers together. This course details how to connect a Cisco environment to a Service Provider using a Cisco CUBE.
Retail Price: $3,895.00
Next Date: 12/11/2024
Course Days: 3
Enroll in Next Date
Request Custom Course
Upon completing this course, the student will be able to meet these objectives:
- Configuring Gateway Voice Ports
- SIP Protocols
- Configuring VoIP Call Legs
- Implementing a Dial Plan
- Configuring Cisco Unified Communication Manager 11.x
- Deploying Cisco VCUBE
- Implementing Cisco Unified Border Element
- High Availability on ISR G2, ISR 4k, and ASR
- Security on Cisco Unified Border Element
- Monitoring and Troubleshooting on Cisco Unified Border Element
Who Should Attend
Outline
Module 0: Introduction
- Lesson 1: Introductions
- Lesson 2: SIP Trunking
Module 1: Introduction to Voice Gateways
- Lesson 1: Gateways
- Lesson 2: Gateway Call Routing Components
- Lesson 3: Dial Peer Matching
- Lesson 4: Introduction to Voice Gateways
- Lesson 5: Digital Signal Processors
- Lesson 6: Codec Complexity
- Lesson 7: Configuring DSPs
Module 2: Gateway Dial Plans
- Lesson 1: VoIP Overview
- Lesson 2: SIP Signaling Protocol
- Lesson 3: SIP Addressing
- Lesson 4: Codecs in SIP
- Lesson 5: Configuring Basic SIP
- Lesson 6: Configuring SIP ISDN Support
- Lesson 7: Customizing SIP Gateways
- Lesson 8: Verifying SIP Gateways
- Lesson 9: Audio Clarity Requirements
Module 3: Cisco Unified Communication Manager (CUCM)
- Lesson 1: Configuring CUCM for Gateways and Trunks
- Lesson 2: SIP Trunk Configuration
Module 4: Configuring Cisco Unified Border Element (CUBE)
- Lesson 1: What Does a Session Border Controller (SBC) Do?
- Lesson 2: CUBE Call Flow
- Lesson 3: CUBE Dial-Peers Call Routing
- Lesson 4: CUBE Advanced Call Routing
- Lesson 5: Media Manipulation
- Lesson 6: External/PSTN Call Recording
- Lesson 7: Call Admission Control
- Lesson 8: Multiple Non-Authenticated SIP Trunks on a CUBE
- Lesson 9: Multiple Authenticated/Registered SIP Trunks on a CUBE
Module 5: Configuring High Availability
- Lesson 1: High Availability
- Lesson 2: MMoH
Module 6: Security
- Lesson 1: CUBE Security
- Lesson 2: SIP TLS Support with SRTP
Module 7: Monitoring and Troubleshooting
- Lesson 1: Monitoring and Troubleshooting Cisco Cube
- Lesson 2: SIP Profile Test Tool
- Lesson 3: Troubleshooting
- Lesson 4: Serviceability
LAB OUTLINE
Lab 0: Connect to Lab
Lab 1: Verify Cisco Unified Communications Manager Initial Settings
- Explore the Lab Environment
- Initial Default Configuration and Perform Initial Configuration
Lab 2: Deploying Endpoints and Users
Pod Mac Addresses for HQ Phone 1
- Configure CUCM
- Configure IP Phones
Lab 3: Connecting Enterprise Network to SIP Trunk Provider
- Configure SIP Trunk Security Profile
- Configure SIP Profile
- Configure SIP Trunk CUBE1
- Configure SIP Trunk CUBE2
- Configure Route Groups for Outbound Calling
- Configure a Route list for Outbound Calling
- Set up Long Distance Route Pattern
- Set up Local Route Pattern
Lab 4: Configure SIP Gateway for CUBE1
- Global CUBE Configuration
- Translation Rules and Profiles for CUBE
- CUBE Firewall Configuration
- CUBE Inbound LAN Dial-peer Configuration
- CUBE Outbound LAN Dial-peer Configuration for Publisher
- CUBE Outbound LAN Dial-peer Configuration for Subscriber
- CUBE Inbound WAN Dial-peer Configuration
- Configure SIP User Agent
- CUBE Outbound WAN Dial-peer for Long Distance Calls
- CUBE Outbound WAN Dial-peer for Local Calls
- CUBE Outbound WAN Dial-peer for International Calls
Lab 5: Configure SIP Gateway for CUBE2
- Global CUBE Configuration
- Translation Rules and Profiles for CUBE
- CUBE Firewall Configuration
- CUBE Inbound LAN Dial-peer Configuration
- CUBE Outbound LAN Dial-peer Configuration for Publisher
- CUBE Outbound LAN Dial-peer Configuration for Subscriber
- CUBE Inbound WAN Dial-peer Configuration
- Configure SIP User Agent
- CUBE Outbound WAN Dial-peer for Long Distance Calls
- CUBE Outbound WAN Dial-peer for Local Calls
- CUBE Outbound WAN Dial-peer for International Calls
- Verify and Test Cube Status
Lab 6: Configure SIP Normalization on both CUBE1 and CUBE 2
- SIP Normalization
- SIP Custom Non-Standard Header
- Troubleshooting SIP Profiles
- Remove SIP Profile
Lab 7: Configure Call Admission Control
- Configure CAC based on call spike to manage call arrival rate
- Configure CAC based on Max Connections
- Configure CAC based on different thresholds
Lab 8: Configurable SIP Error codes
- Configure Error code at the dial-peer level when total-calls are exceeded
Lab 9: Destination Dial-peer Group and Inbound SIP Profiles
- Create a new Route Pattern within your CUCM for the TAC Toll Free number
Lab 10: Multiple E164 Pattern matching under the same dial-peer
Lab 11: Destination Server Group
- Configure Destination Server Groups to deliver call legs to your respective CUCM
Lab 12: CUBE Redundancy
- Perform the Steps on Both Routers
- Configure interface tracking
- Configure Redundancy Group (RG)
- Configure the interfaces
- Challenge (optional)
| Course Dates | Course Times (EST) | Delivery Mode | GTR | |
|---|---|---|---|---|
| 12/11/2024 - 12/13/2024 | 10:00 AM - 6:00 PM | Virtual | Enroll |